Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-334resume hardware-group
8
Synopsis
resume hardware-group
Permissions
The following logins may execute this command: inads, init.
Examples
resume hardware-group
Description
A system technician, in the course of the execution of a "test hardware-group"
command, may find the need to halt the testing, either temporarily or
permanently. A "test hardware-group" command executing in the background
can be canceled with the "cancel hardware-group" command. A "test
hardware-group" command executing in the foreground can be canceled by
pressing the ’cancel’ key on the SAT or by entering the "cancel hardware-group"
command from another SAT. The "resume hardware-group" command provides
the technician the ability to resume the previous "test hardware-group" command
from where it was canceled. This ability to resume a canceled "test
hardware-group" command is lost if another "test hardware-group" command is
entered.
The state of a canceled "test hardware-group" command will appear on the
"status hardware-group" screen as ’canceled’. The state of a resumed "test
hardware-group" command will appear on the "status hardware-group" screen as
’active’.
Defaults
None.
Parameters
None.
Help Messages
If the system technician presses HELP after entering "resume hardware-group,"
the following message will be displayed:
Entry is not required