Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-167enable test-number
8
enable test-number
This command enables a previously disabled test number.
Synopsis
enable test-number number
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
enable test-number 102
Description
This command will re-enable the specified test number that was previously
disabled. This will cause that the test number be allowed to run on the next
request by maintenance or the technician.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses help after entering "enable test-number" the
following message will be displayed:
Enter test number
Error Messages
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login’:’command’ has a command conflict
number This is the specific test number to re-enable.