Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-258CARD-MEM (Memory Card)
10
Memory Card Write-Protection Test (#698)
This test, which is nondestructive, verifies whether the write-protected switch on
the memory card is turned on. The memory card cannot be erased or written to
when the write-protected switch is on.
150 FAIL While the announcement feature is in use, no announcement file is
available in the memory card, and the capacity of the inserted memory
card doesn’t match the system configuration. Also, system translation
reaches a 98% capacity of the memory card reserved storage space.
1. Replace the memory card with one of a larger size. See the system
configuration guidelines.
2. Retry the command at 1-minute intervals a maximum of 5 times.
PASS The inserted memory card matches the system configuration, and the card
has enough space for saving translations and (if applicable)
announcements.
Table 10-80. TEST #698 Memory Card Write-Protected Test
Error
Code
Test
Result Description/ Recommendation
2012
2106
2114
ABORT Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
2013
2100
none
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2108 ABORT The NETCON circuit pack is not a TN777B circuit pack.
1. Follow the Standard Repair Procedures for replacing the NETCON
circuit pack with the TN777B circuit pack.
2. Re-enter the test card-mem command.
Continued on next page
Table 10-79. TEST #697 Memory Card Match Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page