Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1624UDS1-BD (UDS1 Interface Circuit Pack)
10
1950 ABORT Another loopback/span test is already executing on the
DS1 board or the board is in a network requested
loopback mode (Line loopback or Payload loopback).
The hardware error log will indicate whether a Customer
Loopback Jack Test, Far CSU Loopback Test, or the
One-Way Span Test is executing or if the board is in line
loopback or payload loopback mode. Only one
long-duration loopback/span test can be active at a
given time. Thus, if a loopback/span test is already
active, that test must be terminated via the
test ds1-loop
PCSS end-loopback/span-test
command in order to
execute this test.
Table 10-474. TEST #1214 One-Way Span Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page