Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-452status data-module
8
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses HELP after entering "status data-module", the
following message will be displayed:
Enter assigned extension, [’print’]
Error Messages
If the format of the extension is incorrect, the following error message will be
displayed:
Extension invalid
If the extension is not administered, the following message will be displayed:
Extension not assigned
If the object associated with the extension is not a data module, the following
message will be displayed:
Extension exists but assigned to a different object
If software fails to complete the command, one of the following messages will be
displayed:
No tests for this MO
EPN is not available
Board not assigned
Port not assigned
Error encountered, can’t complete request
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
extension The extension of the data module to be displayed. The number of
digits in an extension is determined by a dial-plan.
print This will cause the report to be printed if a printer is linked to the SAT.