Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-493status pri-endpoint
8
Board not inserted
If the EPN on which the PRI endpoint resides is not accessible, the following
message will be displayed:
EPN is not available
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
Extension The extension of the PRI endpoint.
Width Administered number of B-channels associated with the
specified PRI endpoint.
Signaling Group ID The ID number of the signaling group which handles the
signaling for the ports in the specified PRI endpoint.
Originating Auto Restoration Administered option for the auto restore feature which
restores calls originated from this PRI endpoint in the
case of network failure. Displayed values for this field are
"y" for the restoration option enabled and "n" for the
restoration option disabled.
B-Channels Active The number of B-channels active on a call.
B-Channels Idle The number of B-channels that are in the in-service/idle
state.
Port Port locations (cabinet-carrier-slot-circuit) for each of the
B-channels that makes up the PRI endpoint.