Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-330restore announcements
8
Feature Interactions
The reset command will invoke system initialization as if low level maintenance
had done it. This means that the reset level requested will never be escalated by
software. The reset level requested by the technician will always be the level that
is performed.
It should be noted that there are two hardware switches associated with the
active and standby SPEs. These hardware switches override any demand
maintenance activities that the system technician requests. If the active SPE is
locked active with these hardware switches, an interchange will not take place
until the active is unlocked using the same hardware switches.
A successful SPE interchange will always logoff the PPNSAT terminal.
Any level of restart will null out the effect of the health-override option.
restore announcements
This command copies announcement data from the specified MSS device (tape
or Card-Mem) to the announcement board.
Synopsis
restore announcements
[ print | schedule ]
Permissions
The following default logins may execute this command: system technician, cust,
rcust, inads, init.
Examples
restore announcements
Description
The restore announcements command copies announcement data from the
active MSS device to the announcement board.
Defaults
In a tape based system, the announcement data is copied from the active
processor’s tape to the announcement board. In a Card-Mem based system, the
announcement data is copied from the active processor’s Card-Mem to the
announcement board.