Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-169format card-mem
8
Description
The maintenance command, “format card-mem” will erase and format the memory card for
translations announcements, coredump, and firmware.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses help after entering "format card-mem" the
following message will be displayed:
Enter ‘translation’ or ‘announcements’ or ‘coredump’ or ‘firmware’
‘translation’ option formats for translation only
‘announcements’ option formats for translation and announcements
‘coredump’ option formats for translation, announcements, and code-dump
‘firmware’ option formats for translation, announcements, and firmware
Or press CANCEL to cancel the command
Error Messages
If the format memory [translation] [announcements] [coredump] [firmware]
maintenance command is executed and errors occur, one of the following error
messages will be displayed:
Memory card is not inserted in the system
Cannot turn on 12 volt power supply
Memory card is write-protected
Unknown type of memory card
Could not write to memory card
Could not erase memory card
Memory card too large for operation requested
Memory card too small for operation requested
Error encountered, memory card unusable
translation If specified, this parameter will erase and format the memory card
for translations only.
announcements If specified, this parameter erase and format the memory card for
translations and announcements.
coredump If specified, this parameter will erase and format the memory card
for translations, announcements and coredump
firmware If specified, this parameter erase and format the memory card for
translations, announcements and firmware