Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-429status conference
8
Gx Does it have the Still Frame Graphics capability? - y, e, blank
y This endpoint has this capability.
e This endpoint did not declare this capability. The conference
retains the still frame graphics capability when a non-compliant
endpoint joins the conference.
blank This endpoint has never joined the conference.
Rate Adpt Rate adaptation/Interworking indicator - 5, 6, y, c, e, n, blank.
Values of 5 and 6 apply only to Low Speed/High Speed Interworking.
All other values apply only to Rate Adaptation.
5 A 56-kbps (Low Speed) endpoint has joined a High Speed (128
kbps or above) conference. This endpoint is connected with audio
only capability but is not a valid video source and destination.
6 A 64-kbps (Low Speed) endpoint has joined a High Speed (128
kbps or above) conference. This endpoint is connected with audio
only capability but is not a valid video source and destination.
y This endpoint has joined the conference at the administered rate of
64 kbps, but because rate adaptation to 56 kbps was triggered by
another endpoint, this endpoint has successfully rate adapted to 56
kbps.
c The administered bandwidth of the conference is 64 kbps and this
endpoint has joined the conference at 56 kbps. The first 56 kbps
endpoint that joins 64 kbps rate adaptable conference triggers rate
adaptation (see Join Time below).
n A 64-kbps conference was triggered to rate adapt to 56 kbps by
some other endpoint. This endpoint joined the conference at the
bandwidth of 64 kbps, but encountered problems in rate adapting
down to 56 kbps. This endpoint may have the audio and may be
receiving video, but is not a valid video source.
blank Rate adaptation was never triggered by any endpoint, and if
this endpoint is in use and connected, then it has joined the
conference at the administered bandwidth.
Bond Mode BONDing Mode - blank. This field is blank for calls that are not related
to bonding.