Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-668test synchronization
8
Examples
test synchronization r 3
test synchronization sh r 1
test synchronization sh r 1 schedule
test synchronization l
Description
The test synchronization command makes sure that the proper sources are
being used for timing synchronization and updatse the boards with the correct
synchronization parameters. The tone-clocks, DS1s, and EIs are all sent
down-link messages to place them in the correct synchronization configuration
given the current on-line synchronization reference.
The synchronization subsystem provides error free digital communication
between the switch and other PBXs, COs, or customer premise equipment. The
subsystem is made up of: TDM bus clock, DS1 trunk board, and maintenance
and administration software resident in the SPE.
Defaults
The default for this command is short with a repeat of 1.