Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-313release trunk
8
Examples
release trunk 78
release trunk 78/1
Description
The release trunk command will remove the specified trunk group or trunk group
member from a maintenance busy state. A single group member can be
released by specifying the group number, a "/," and the member number. All
members in a trunk group can be released by specifying the trunk group number
only.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses HELP after entering "release trunk," the following
message will be displayed:
Enter assigned trunk group number [or group/member]
Error Messages
If the format of the identifier is invalid, the following message will be displayed:
Format invalid
If the range of the trunk group is incorrect, the following error message will be
displayed:
Trunk or trunk group invalid
If the specified trunk group is not administered or has no members, the following
message will be displayed:
Group not assigned,
or group assigned but with no member
group The group number is an administered number associated with each
trunk group. The valid range is 1 - 99.
member The member number is an administered number identifying a
particular trunk within a trunk group. The valid range is 1 - 99.