Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-488status periodic-scheduled
8
Output
For the following output example, the command "status periodic-scheduled" was
entered.
Pre - SCHEDULED
MAINTENANCE
During scheduled maintenance, a delay of about 1 to 15
minutes can be observed prior to the testing of System Critical
Resources. During this period maintenance is switching those
duplicated resources administered on the system-parameters
maintenance screen.
Pre-scheduled maintenance also includes the time the standby
SPE is being tested in a system with the duplication option.
System Critical
Percentage Complete:
The ratio of the number of System Critical MOs tested to the
number of System Critical MOs left to test. This number is
displayed for the current testing period as well as the previous
testing period. System critical resources are considered
imperative to test, and are tested first (for example, Processor).
Shared Percentage
Complete:
The ratio of the number of Shared MOs tested to the number of
Shared MOs left to test. This number is displayed for the
current testing period as well as the previous testing period.
Shared resources are resources that are used by more than
one user, and are tested after system critical resources (for
example, Trunks).
Single User
Percentage Complete:
The ratio of the number of Single User MOs tested to the
number of Single User MOs left to test. This number is
displayed for the current testing period as well as the previous
testing period. Single User resources are resources that are
used by a single user only, and are tested after shared
resources (for example, Voice Stations).
Start Time of Current
or Previous Cycle:
For both periodic and scheduled maintenance if any of the
three levels of MOs are active, then the time the System Critical
MOs started for this current cycle is shown. If, however, none
of the MO levels are currently being tested, then the start time
for previous completed cycle is shown.