Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1519TSC-ADM (Administered Temporary Signaling Connections)
10
1149 ABORT The ADMTSC is disabled.
1. Enable the TSC, and see if the status indicates
"active."
2. Reissue the test tsc-administered command.
3. If the TSC still disabled, remove the ADMTSC from
the system.
1181 ABORT Ran out of ADMTSC resources.
1. Reissue the test tsc-administered command at
one-minute intervals a maximum of three times.
2. If test continues to abort, escalate the problem.
1182 ABORT The BX.25 link is down at the gateway.
1. Disable the ADMTSC.
2. Check the status of the gateway link via the status
link link-no command.
3. Once the gateway link indicates an "in-service" state,
enable the Administered TSC.
4. Reissue the test tsc-administered command.
5. If the test still aborts, escalate the problem.
Table 10-453. TEST #604 TSC Hartbeat Inquiry Test
Error
Code
Test
Result Description/ Recommendation
Continued on next page