Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-310release tone-clock
8
release tone-clock
This command will release a tone/clock circuit pack.
Synopsis
release tone-clock location
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
release tone-clock c
Description
The release tone-clock command will remove the specified tone/clock from a
maintenance busy state.
Defaults
The cabinet number will default to 1 (one).
Parameters
Help Messages
If the system technician presses HELP after entering "release tone-clock," the
following message will be displayed:
Enter tone/clock location:
[cabinet(1-3)];(carrier(A-E))
Error Messages
If an identifier greater than 3 (three) characters is entered, or the cabinet entered
is not a digit (number), the following message will be displayed:
Identifier invalid
location A "location" represents the physical position of the tone/clock to be
released and is entered as "UUc" where "UU" represents the cabinet
number, and "c" represents the carrier. A single digit cabinet number
(1 - 3) may be entered with or without a leading zero (0).