Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-916MODEM-PT (Modem Pool Port)
10
1020 ABORT The test did not run due to a previously existing error on
the specific port or because of a more general circuit
pack error.
1. Examine the Hardware Error Log for existing errors
against this port or the circuit pack, and attempt to
diagnose the previously existing errors.
2000 ABORT A response to the test request was not received within
the allowable time period.
1. Retry the command at one minute intervals a
maximum of five times.
2. If the test continues to abort, escalate the problem.
2100 ABORT System resources required for this test are not available.
1. Retry the command at one-minute intervals a
maximum of five times.
2. If the test continues to abort, escalate the problem.
Table 10-260. TEST #96 Modem Pool NPE Crosstalk Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page