Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-490status pms-link
8
Description
The status pms-link command displays the status of the property management
system interface link. If the link is up, whether or not a data base swap is taking
place between the switch and PMS, will be shown. If the link is down, the number
of times the switch has tried to set up the link will be shown.
A property management system (PMS) is a stand alone computer system which
can be integrated with the switch to enhance the service capability for a
hotel/motel.
For general information on PMS links, see the second paragraph in the
"Description" section of the "busyout pms-link" manual pages.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses HELP after entering "status pms-link", the
following message will be displayed:
[’print’]
Error Messages
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
print This will cause the report to be printed if a printer is linked to the SAT.