Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-51change circuit-packs
8
Synopsis
change circuit-packs cabinet number
Permissions
The following default logins may execute this command: system technician, cust,
inads, init, nms.
Examples
change circuit-packs 1
change circuit-packs 2
Description
This command allows the user to administer the circuit packs that are to be
inserted into the system port, expansion control, and switch node carriers. It is
used to configure the system when the circuit packs have not yet been physically
inserted.
Defaults
If no cabinet number is entered, this value defaults to "1."
Parameters
Help Messages
If the system technician presses HELP after entering "change circuit-packs" the
following message is displayed:
Enter number between [1-3]
cabinet number The number of the cabinet containing the circuit packs that the user
wishes to modify.