Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-506status station
8
Error Messages
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
Type The administered station type.
Extension The extension of the station or attendant to be displayed.
Port The port location of the station (cabinet-carrier-slot-circuit).
Call Park Whether the station has a call parked ("yes" or "no").
Ring Cut Off Activated Whether ring cut off is activated ("yes" or "no").
CF Destination Ext The call forwarding destination extension, if any.
Message Waiting Whether there is a message waiting for the station. "AP-SPE",
"AUDIX", "PMS" or blank if no messages are waiting.
Connected Ports Port locations of the facilities to which the station is
connected (cabinet-carrier-slot-circuit).
Agent Logged In Displays (underneath it) the hunt groups (up to 3) that the
agent is logged into.
On ACD Call? Whether the agent is on an ACD call currently ("yes" or "no").
Work Mode Work mode of each hunt group that an agent is logged into.
Service State In service/on-hook, in service/off-hook, out of service, or
disconnected.
Maintenance Busy State Whether maintenance is testing the object ("yes" or "no").
SAC Activated Whether send all calls is activated ("yes" or "no").
User Cntrl Restr One or two of the following: "none", "total", "stat-stat",
"outward" or "terminate".
Group Cntrl Restr One or two of the following: "none", "total", "stat-stat",
"outward" or "terminate".
AWU Call at What time an automatic wakeup call is scheduled.