DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Routine Maintenance Procedures
Page 5-28Software Upgrade
5
5. Software release label to be applied to the processor circuit pack after a
successful upgrade
The following table indicates the processes and their corresponding time
allotment for the upgrade procedure.
Figure 5-5
presents output that appears on the terminal during this procedure.
Figure 5-5. Terminal Display for a Duplex System Software Upgrade
Process
Time
(minutes)
save translation 9
save announcement 45
upgrade software 15
save translation 9
miscellaneous 11
Total Time 90
TN786 CLMM Release X.X.X
INITIATING SOFTWARE UPGRADE
MEM-CARD CHECKSUM PASSED
REPROGRAMMING MTP PASSED
ERASING MEMORY PASSED
REPROGRAMMING SPE PASSED
REPLACE SOFTWARE MEM-CARD ON B WITH TRANSLATION MEM-CARD
UPGRADE COMPLETE
REPLACE TRANSLATION MEM-CARD ON A WITH SOFTWARE MEM-CARD
TN786 CLMM Release X.X.X
INITIATING SOFTWARE UPGRADE
MEM-CARD CHECKSUM PASSED
REPROGRAMMING MTP PASSED
ERASING MEMORY PASSED
REPROGRAMMING SPE PASSED
REPLACE SOFTWARE MEM-CARD ON A WITH TRANSLATION MEM-CARD
UPGRADE COMPLETE