Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-116display errors
8
From Display only error records from the time specified by dd/hh/mm,
where dd is the day, hh is the hour and mm is the minute. The
default is the earliest time of the existing error records in the log.
To Display only error records to the time specified by dd/hh/mm, where
dd is the day, hh is the hour and mm is the minute. The default is the
current time.
Equipment Type The technician can choose between seven different equipment
types:
Cabinet: This allows the technician to display all errors associated
with a particular cabinet. Errors for a cabinet are referenced by a
number ranging from 1 to 3 which is assigned during cabinet
administration.
Port Network Number: This allows the technician to display all errors
associated with a particular port network number. Errors for a port
network are referenced by a number ranging from 1 to 3.
Board Number: This allows the technician to choose all errors
associated with a particular circuit pack for display. Errors for a
circuit pack are referenced by circuit pack location
(cabinet-carrier-slot).
Port: This allows the technician to choose all errors associated with a
particular port on a circuit pack for display. Errors for a port circuit
are referenced by port location (cabinet-carrier-slot-circuit).
Category: Errors for a particular equipment category.
Extension: Errors associated with an extension number.
Trunk (group/member): The technician can choose to view all errors
associated with a particular trunk group or trunk group member. The
group identifier should be entered to view all errors associated with
a trunk group XXX/___. The group identifier and member identifier
should both be entered to view all errors associated with a specific
trunk group member XXX/XXX.