Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-294release pms-link
8
Description
The release pms-link command removes all MOs associated with a property
management system link from the maintenance busy state. A link is made up of
several components. It involves a far-end data module, a simulated data channel
on a NETCON board, a manager that initiates and maintains the link, and a
controller/protocol that services the link. A link is considered up if a physical
connection is established. A link can be considered to be up while no useful work
can be performed over it, in this case the link is insane and should be torn down.
These links provide asynchronous data connections from the switch to
peripherals.
Defaults
None.
Parameters
None.
Help Messages
If you press HELP after entering "release pms-link" the following message
displays:
Entry is not required
If the command entered is in conflict with another currently executing command,
then a message displays showing the login ID of the conflicting user and the
conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, the following
message displays:
All maintenance resources busy; try again later