Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-377status administered-connection
8
Output
For the following output example, the command status administered-connection
3 was entered.
Feature Interactions
None.
Connection Number: The number assigned to the administered connection.
Enabled? Whether the administered connection is enabled ("y" or "n").
Originator: The extension of the originating access/data endpoint.
Destination: The destination address to be used in the routing of the
administered connection.
Connection State: The current status of the administered connection. Valid values
are "connected," "restored," "failed," "waiting to retry," "attempting
to restore," "attempting to connect," "not scheduled," and
"disabled."
Failure Cause: The cause of the state of the administered connection (that is,
why the state is reported as attempting to connect, attempting to
restore, or having failed to restore). If the administered
connection was due to be active but is not connected, then this
field shows the most recent reason for failure.
Number of Retries: The number of consecutive failed establishment attempts.
Auto Restorable? When an administered connection is in the connected state, this
field indicated whether or not auto restoration is attempted when
failure occurs.
status administered-connection 3 page 1 of 1
ADMINISTERED-CONNECTION STATUS
Connection Number:
Enabled?
Originator:
Destination:
Connection State:
Failure Cause:
Number of Retries:
Auto Restorable?