Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-134display memory-configuration
8
Error Messages
If “display memory-configuration” is executed, the following error message will
appear on the SAT status line:
“memory-configuration” is an invalid entry; please press HELP
If ““display memory-configuration long” is executed on a simplex system, the
following error message will appear on the SAT status line:
”long” is an invalid identifier; please press HELP
If “display memory-configuration long” is executed when the standby processor
is not available, the following message will appear on the SAT status line:
Cannot access the standby SPE at this time
Output
The following output example is for the display memory long command.
display memory-configuration long SP_A
PROCESSOR MEMORY-CONFIGURATION
(M bytes)
SPE_A SPE_B
Flash ROM: 16 16
Total DRAM: 12 12
SIMM A: 4 4
SIMM B: 4 4
SIMM C: 4 4
Command successfully completed
Command: