Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-332restore announcements
8
If the NETCON data module is busy the following message is displayed:
Required NETCON data module unavailable
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
Output
For the following output example, the command entered is "restore
announcements" on a simplex SPE system.
Feature Interactions
!
WARNING:
Use of the manager I is blocked for other activities until the command
completes, which can take up to 45 minutes
The command is denied if no announcement data module and no NETCON data
module has been administered.
The command is denied if the announcement data module port is out of service
or active (e.g. performing an announcement playback).
The command is denied if a user is in an integrated announcements session.
Processor This field displays the processor on which the MSS device
resides that was used to copy announcement data.
Command Completion
Status
This field specifies whether the command completed
successfully. Valid values are:
Error Code This is a numerical description of whether the announcement
file is successfully restored to the announcement board. A
value of "0" means that the restore was successful. A value of
"1" denotes that the restore failed.
restore announcements Page 1 of 1 SPE A
RESTORE ANNOUNCEMENTS
Processor Command Completion Status Error Code
SPE-A Success 0