Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1224S-SYN-PT (Speech Synthesis Port)
10
Table 10-381. TEST #168 Speech Synthesis PSS Handshake Test
Error
Code
Test
Result Description/ Recommendation
ABORT Could not allocate the necessary system resources to
run this test.
1. Retry the command at one-minute intervals a
maximum of five times.
2. If the test continues to abort, escalate the problem.
1000 ABORT System resources required to run this test are not
available. The port may be busy with a valid call and
therefore unavailable for certain tests. You must wait
until the port is idle (yellow LED if off) before retesting.
1. If the port is idle, retry the command at one-minute
intervals a maximum of five times.
2. If the test continues to abort, escalate the problem.
2000 ABORT Response to the test request was not received within the
allowable time period.
2100 ABORT Could not allocate the necessary system resources to
run this test.
1. Retry the command at one-minute intervals a
maximum of five times.
2. If the test continues to abort, escalate the problem.
Any FAIL The on-board microprocessor has timed out while
waiting for the PSS controller to respond or an invalid
command has been received by the on-board
microprocessor from the PSS controller. This type of
failure may cause features using the Speech Synthesis
Port’s speech services to malfunction.
1. Replace the circuit pack.
PASS The on-board microprocessor/PSS handshake is
working correctly. User-reported troubles should be
investigated using other tests and verifying other ports
on this circuit pack are working correctly.
Continued on next page