Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-241CAP-MEM (Memory Card Capacity)
10
Notes:
a. Refer to 12V-PWR (12 Volt Power Supply) Maintenance documentation for
a description of this test.
b. Refer to CARD-MEM (Memory Card) Maintenance documentation for a
description of this test.
Memory Card Capacity Test (#1014)
This test is a nondestructive test. The purpose of the test is to verify that the
percentage of translation storage space used in the memory card is less than
98%.
This test can be initiated through a system technician demanded test card-mem
long command, or it can be executed as part of a maintenance test sequence
after the save translation operation.
1. D = Destructive; ND = Nondestructive
Order of Investigation
Short Test
Sequence
Long Test
Sequence D/ND
1
12 Volt Power Supply Test (#701) (a) X X ND
Memory Card Insertion Test (#695) (b) X X ND
Memory Card Format and Read Test (#696) (b) X X ND
Memory Card Match Test (#697) (b) X X ND
Memory Card Write-Protected Test (#698) (b) X X ND
Memory Card Directory Recovery Test (#699) (b) X X ND
Memory Card Translation Data Integrity Test (#694) (b) X ND
Memory Card Erase/Write/Read Test (#693) (b) X ND
Memory Card Capacity Test (#1014) X ND