Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-408status cdr-link
8
Description
The status cdr-link command displays the status of call detail recording (CDR)
links. Whether the link is up or down will be displayed. If a link is down, the
number of times the switch has tried to set up the link will be shown.
The call detail recording (CDR) link is the physical link connecting the SPE to a
recording device (for example, printer) for sending CDR call records. A CDR link
is composed of a data channel on the NETCON board or EIA port on the
processor circuit pack, a digital port and a data module. There can be up to two
CDR links in the system.
Defaults
No defaults.
Parameters
Help Messages
If the system technician presses HELP after entering "status cdr-link", the following
message will be displayed:
[’print’]
Error Messages
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
print This will cause the report to be printed if a printer is linked to the SAT.