Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1286STBY-SPE (Standby SPE)
10
2024
(cont’d.)
ABORT 6. Check the Inter-Carrier Cable to see if it is loose or disconnected. If so,
follow the repair procedures for reconnecting the Inter-Cabinet Cable
described in Chapter 6, ‘‘
Reliability Systems: A Maintenance Aid’’.
7. If all problems found in Steps 1, 2, 3, 4, 5, and 6 have now been repaired,
proceed with Step 11. If no problems were found in Steps 1, 2, 3, 4, 5, and
6, proceed with Step 8.
8. Issue the display errors command and check to see if Error Type 80 is
logged against STBY-SPE. If so, the problem is the carrier A Duplication
Interface circuit pack. Replace the carrier A Duplication Interface circuit
pack as described in Chapter 6, ‘‘
Reliability Systems: A Maintenance Aid’’
and proceed with Steps 11, 12, and 13.
9. Issue the display errors command and check to see if an Error Type 81 is
logged against STBY-SPE. If so, the problem is the Standby SPE
Processor circuit pack. Replace the Standby SPE Processor circuit pack
as described in Chapter 6, ‘‘
Reliability Systems: A Maintenance Aid’’ and
proceed with Steps 11, 12, and 13.
Table 10-392. Test Result Error Codes Associated with the Standby SPE
— Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page