Lucent Technologies R5SI Computer Hardware User Manual


  Open as PDF
of 2643
 
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-198BRI-SET, ASAI-ADJ, BRI-DAT
10
50 Requested
Facility Not
Subscribed
Requested facility is implemented, but not
administered. Potential administration problem with
endpoint or adjunct. For BRI endpoints:
1. Verify the switch administration of endpoint
using either the display station or display
data-module commands.
2. If Step 1 does not resolve the problem, refer to
the endpoint’s service manual and verify
administration on the endpoint.
3. If Step 2 does not resolve the problem, escalate
to the next tier.
For ASAI adjuncts:
1. Display the Customer Optional Features Form
(administration screen) on the switch to
determine which ASAI capabilities are turned on
in the switch.
2. Verify that the adjunct is administered to
support the identical capabilities as the switch.
If there is a mismatch in the administered
capabilities, then readminister the switch and/or
the adjunct to establish a consistent set of
desired capabilities on both the switch and the
adjunct.
3. If Step 2 does not resolve the problem, escalate
to the next tier.
For AT&T adjuncts:
1. Display the Customer Optional Features Form
(administration screen) on the switch to
determine if the AT&T adjunct is set enabled on
in the switch.
2. If error type 2567 or 2568, verify the AT&T
adjunct version, and readminister if needed.
3. If step 2 does not fix the problem, escalate to
the next tier of support.
Table 10-65. ISDN-BRI Cause Values — Continued
Code Explanation Recommendation
Continued on next page