Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-301release sp-link
8
Synopsis
release sp-link
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
release sp-link
Description
The release sp-link command will return the busied out system printer link to
operation and resolve all active alarms for the system printer link.
The system printer link is a link from the switch to an external printer over which
jobs can be printed. This link is created by administering the system printer
extension and setting up a call to the system printer.
Defaults
No defaults.
Parameters
None.
Help Messages
If the system technician presses HELP after entering "release sp-link," the
following is displayed:
Entry is not required
Error Messages
If the system printer link is not administered, the following message is displayed:
Link not administered or not enabled
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message is displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit