Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-83clear pkt
8
Synopsis
clear pkt port-network location
Permissions
The following default logins may execute this command: cust, inads, init.
Examples
clear pkt port-network 1
Description
This command helps resolve problems with the packet bus.
Parameters
Help Messages
If the technician presses HELP after entering "clear pkt," this message displays:
Enter port-network; port network number (1-3)
Error Messages
If the packet bus is not administered, this message displays:
Packet Bus is not activated, check system-parameters maintenance form
If all available maintenance resources are in use, this message displays:
All maintenance resources busy; try again later
Output
If the clear pkt command is successful, this message displays:
Command successfully completed
Feature Interactions
None. For additional information, refer to EDD document 23154.
location A "location" represents the physical position of the packet bus that is forced to
send a ’clear stimuli’ to all boards connected to it. Enter a digit (1 - 3).