Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-185BRI-PORT (ISDN-BRI Port), ABRI-PORT (ASAI ISDN-BRI Port)
10
Clear Error Counters Test (#270)
This test is not an actual test in the strict sense of the word. There are various
error counters associated with each
BRI-PORT/ABRI-PORT/ATT-PORT/LGATE-PT/ATTE-PT. This test clears those
counters and triggers the auditing of Terminal Endpoint Identifier (TEI) values
and layer 3 reinitialization. This test is used only to send messages to the
BRI-PORT/ABRI-PORT/ATT-PORT/LGATE-PT/ATTE-PT and, therefore, should
neither abort nor fail.
PASS The Receive FIFO Overflow error counter was read
correctly and has a value of 0.
Table 10-62. TEST #270 Clear Error Counters
Error
Code
Test
Result Description/ Recommendation
Any ABORT This test should never abort.
Any FAIL This test should never fail.
1. Retry the command at one-minute intervals a
maximum of five times.
2. If the test continues to fail, escalate the problem.
PASS The message to clear the error counters of the
BRI-Port/ABRI-Port/ATT-PORT/LGATE-PT/ATTE-PT has
been sent.
Continued on next page
Table 10-61. TEST #625 Receive FIFO Overflow Error
Counter Test — Continued
Error
Code
Test
Result Description/ Recommendation
Continued on next page