Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-271release access-endpoint
8
If the standby is currently entering maintenance mode, then the following will be
displayed:
Cannot interrupt Standby SPE while entering
maintenance mode; please try later
If the standby is busy with another task, then the following will be displayed:
Standby SPE not available; for information use "status
system"
If the standby is in the process of doing a software upgrade, then the following
will be displayed:
Standby SPE upgrade in progress, command denied
Feature Interactions
The refresh command is not allowed while the standby SPE is being brought out
of standby mode into maintenance mode. Once fully in maintenance mode,
however, the command can be executed.
release access-endpoint
This command will release a specified access endpoint.
Synopsis
release access-endpoint extension
Permissions
The following default logins may execute this command: system technician,
inads, init, nms.
Examples
release access-endpoint 25012
release access-endpoint 77868
Description
The release access endpoint command will remove all ports associated with the
specified access endpoint from a maintenance busy state. Periodic and
scheduled tests will resume on the released ports. Maintenance will do
background initialization testing on the released ports. For details of the test
sequence, refer to [3].