Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-311release tone-clock
8
If the carrier entered is invalid, the following message will be displayed:
Invalid carrier specified
If the cabinet entered is not within the valid range of cabinets or the cabinet is not
administered, the following message will be displayed:
Cabinet number not assigned
If there is no tone/clock board at the specified location, one of the following
messages will be displayed:
Board not inserted
Board not assigned
If the specified cabinet carrier location is that of a switch node, the following
message will be displayed:
Switch Node carrier specified;
invalid command for SN carrier
If the cabinet carrier location entered is that of an EPN that is not available, the
following message will be displayed:
EPN is not available
If the tone/clock is not busied out and the specified action is release, the
following message will be displayed:
Object is not busied out; can’t release
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later