Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-531status tti
8
Error Messages
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit.
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later.
Output
For the following output example, the command "status tti" was entered.
TTI Background Task
State:
The state of the tti background maintenance task: generating tti
ports, removing tti ports, suspended, not active, completed - all
ports translated, completed - some ports not translated. If the
last execution of the background task completed normally,
then "completed - all ports translated" is displayed here. If the
task completed due to resource exhaustion with some ports left
untranslated, then "completed - some ports not translated" is
displayed in this field.
TTI State: The tti state field contains "off" if the TTI feature is not enabled
for the system or if it is enabled then it contains what kind of tti
ports are being generated or removed: voice, data.
# of Boards
Completed:
The number of TTI-supported boards that have had been
processed by the background maintenance task. A
"completed" board has either had all its unadministered ports
translated as TTI ports or its TTI ports have been removed and
are now unadministered ports. This depends on whether the
TTI background task is generating or removing tti ports.
# of Boards Left to
Process:
The number of TTI-supported boards that have not yet been
processed by the background maintenance task.
Percent Complete: A ratio of the of number of boards completed and the number
of boards left to process.
Elapsed Time since
Task Started:
The amount of time that has elapsed since the TTI background
task was started. If the task is "not active", then this field will
blank. If the task is "completed" it will indicate the length of time
it took to complete the task. If the task is "suspended", then it
will display the elapsed time at the point the task was
suspended. The time is displayed in the HH:MM format where
HH is hours and MM is minutes.