Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-5busyout board
8
Synopsis
busyout board location
Permissions
The following default logins may execute this command: system technician,
inads, init.
Examples
busyout board 01c11
busyout board 02c15
Description
The busyout board command will put every administered maintenance object on
the circuit pack at the specified location in a maintenance busy state. There will
be no periodic or scheduled tests performed on the busied out objects until they
are released. The ports on the board may not be used for call processing (i.e.,
terminals on the administered ports will not receive dial-tone, etc.). Warning
alarms are generated (error type 18) on each maintenance object busied out, so
that INADS can access the state of the objects. The release board command will
return every administered maintenance object on the circuit pack at the specified
location to operation.
!
WARNING:
This command is service disrupting and may cause extraneous alarms.
Defaults
No defaults.