Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-289release modem-pool
8
"release" is an invalid entry; please press HELP
If the group or member numbers entered are not in a valid format, the following
message will be displayed:
Identifier invalid
If the group number entered is not within the range of groups or the member
number is not within the member range, then the following message will be
displayed:
Boards not assigned
If the specific group or member are not administered, then the following
message will be displayed:
Group not assigned, or group assigned but with no member
If a software fault is encountered while the command is executing, the following
message will be displayed:
Error encountered, can’t complete request
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
Output
When each modem pool member has been busied out, the following information
will be displayed:
Port The port address (cabinet-carrier-slot-circuit) of the maintenance
object which is being busied out.
Maintenance Name The type of maintenance object that is being busied out or
released. This is always MODEM-PT.