Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-398status bri-port
8
BRI 64-126 L3-Establishe
d
ext blank Normal state for automatic
TEIBRI endpoints supporting
MIM initialization.
BRI, ASAI 64-126 L3-Establishe
d
blank yes SPID Facility Test is being
conducted on the port by
system technician. Link is not
associated with a BRI endpoint
on the port. See description of
SPID Facility Test Procedures
described in the BRI-SET
(ISDN-BRI Set/ASAI Adjunct)
Maintenance documentation.
BRI 64-126 L3-Establishe
d
ext yes SPID Facility Test is being
conducted on the port by
system technician. Link is
associated with an endpoint on
the port. See description of SPID
Facility Test Procedures
described in the BRI-SET
(ISDN-BRI Set/ASAI Adjunct)
Maintenance documentation.
BRI 0-126 L3-Establishe
d
blank blank Invalid SPID assigned to link.
1. Change the SPID value in
the BRI endpoint to match
the SPID administered to
the BRI endpoint on the port.
Verify the repair by
executing the status
bri-port PCSSpp
command. Determine that
the L2 state of the BRI
endpoint is L3-Established.
Table 8-3. Status BRI-Port Command Interpretation — Continued
Endpoint
Types
TEI
Range Layer 2 State
Voice
Extension
Service
SPID Description / Recommendation
Continued on next page