Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-482status mst
8
Parameters
None.
Help Messages
If you press HELP after entering "status mst", the following message displays:
Entry is not required
Error Messages
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
Command resources busy;
Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
All maintenance resources busy; try again later
FORM Output
After entering the command "status mst", the user will be presented with the
following form. The current settings will be placed in the fields.
MST STATUS
Trace Status: enabled
Start Trigger Status: triggered
Stop Trigger Status: not triggered
Pending Stop Count: 5
Enable Trace Time: 1/21/90 10:30
Disable Trace Time : 3/31/90 10:30
Percent of Current Wrap: 100
Wraparound Count: 2
Oldest Message Number: 3345
Newest Message Number: 3923
Completed Snapshots: 0