Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-483status packet-control
8
Feature Interactions
None.
status packet-control
This command displays the status of the specified packet-control.
Synopsis
status packet-control
location
Permissions
The following default logins may execute this command: system technician,
inads, init, nms
trace status Can be "enabled", "disabled by command", "disabled by
timer", "disabled by buffer full", "disabled by stop trigger or
count" or "disabled by restart".
trigger status Can be "none", "not triggered", "triggered".
Pending stop count This field will have a value in it whenever it is actually being
used. The value will indicate the number of messages to
be collected before stopping the trace.
Enable trace time The time the trace was enabled.
Disable trace time The time the trace was disabled or will be disabled by the
run time limit.
Percent of current wrap The percentage of the buffer that has been written since
the last wraparound.
Wraparound count The number of times that the buffer has wrapped around.
This will initially be 0.
Oldest message number The sequence number of the oldest message in the trace.
Newest message number The sequence number of the newest message in the trace.
Completed snapshots The number of complete snapshots that have been
collected.