Lucent Technologies R5SI Computer Hardware User Manual


  Open as PDF
of 2643
 
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-79clear isdn-testcall
8
If a trunk group and member is not specified, this message displays:
Must specify group/member pair
If the specified trunk group is not administered or has no members administered,
this message displays:
Group not assigned, or group assigned but with no member
If the specified trunk group member is not administered, this message displays:
Group member not assigned
If the board on which the port resides is not administered, this message displays:
Port not assigned
If a test call is currently not in progress when the command is entered, this
message displays:
Test Call not in progress
If the specified trunk is not an ISDN-PRI trunk, this message displays:
Invalid non ISDN-PRI trunk specified
If the test call has already completed, the following message is displayed:
Test Call already terminated
If, during the execution of a command, a resource problem occurs that requires
the user to restart the command, this message displays:
Command resources busy; Press CANCEL to clear, and then resubmit
If all available maintenance resources are in use, this message displays:
All maintenance resources busy; try again later
Output
If the clear isdn-testcall command is successful, this message displays:
Command successfully completed
If the clear isdn-testcall command is unsuccessful, this message displays:
Error encountered, can’t complete request
Feature Interactions
None.