Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-615test maintenance
8
Error Messages
For any system, if the entered value is invalid, the following message will be
displayed:
Identifier invalid
If the port network specified is not available, the following message will be
displayed:
EPN is not available
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
Output
The responses will be displayed on a test-by-test basis with one line of data
displayed for each test result.
For the following output example, assume that the command that was entered
was "test maintenance 2".
Port The port address (cabinet-carrier) of the maintenance object that
is being tested. For this maintenance object, only the cabinet and
carrier values are displayed.
Maintenance Name The maintenance name will always be MAINT.
Alt. Name Not applicable.
Test No. The actual test that is being executed.
Result The result of the individual test -"PASS," "ABORT," "FAIL,"
"DISABLED."
Error Code A system-generated number that tells why the test failed or
aborted. A detailed list of the codes according to "Test No." is
provided for each MO.