Filter
Top Products
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-438status conference
8
Mode Commands/Communication Modes. This is a collection of both incoming
and outgoing bandwidth allocations for the multiplex. The Incoming data is the
rate at which the MCU thinks the endpoint is communicating based on the
Bit-rate Allocation Signal (BAS) codes received from the endpoint/codec and the
capabilities the MCU has declared. The Outgoing data is the rate from the MCU
toward the endpoint. The following are column definitions for this section of page
3.
Broadcaster Indicates the endpoint number that is the current broadcaster. The
Broadcaster can be qualified with the following keywords:
1. Broadcast - indicates a broadcast mode broadcaster.
2. Chair - indicates that the broadcaster was designated by the
chair.
3. See-Me - indicates that the broadcaster is a result of MCV
request from an endpoint.
4. Presenter - indicates a presentation mode broadcaster.
5. Rollcall - indicates that the broadcaster was designated by
the UCC via the Rollcall feature.
6. UCC - indicates that the broadcaster was designated by the UCC.
7. VAS - indicates a Voice Activated Switching broadcaster.
Next
Broadcaster
Indicates the endpoint number that is selected to be the next
broadcaster.
Return Vid Indicates the endpoint number that is the current return video. The
return video can be qualified with the following keywords:
1. blank - indicates that the return video is the previous broadcaster
forced to be return video because of VAS, action by Chair, action
by UCC, or endpoint MCV request. The broadcaster qualifier
identifies which action forced this endpoint to become return
video.
2. Autoscan - indicates auto scan return video. This is true only
when conference mode is broadcast with auto scan.
3. Browse - indicates that the return video was designated by the
UCC via the Browse feature.
4. VAS - indicates a Voice Activated Switching return video.
Next Return
Vid
Indicates the endpoint number that is selected to be the next return
video.
CONF The desired conference operating mode. This may be different from
the endpoint in (EPT-IN) or endpoint out (EPT-OUT) modes.
CMD labels for the various types of mode commands